Halo logo
Marketplace For Industry Partners For Innovators
Contact sales Sign in Join now
Marketplace For Industry Partners For Innovators Contact sales Sign in

Get the Discover digest

Receive a weekly email digest of the latest electronic materials added by the network.

Discover innovations in electronic materials

Get the Discover digest

Receive a weekly email digest of the latest electronic materials added by the network.
›Industrial materials›Electronic materials

Browse 584 solutions in electronic materials on the Halo network

Updated Sept 30, 2026

Electronic materials covers the semiconductors, films and chemistries a device is built from. On Halo, the solutions cover short-wave infrared photodetectors, III-nitrides on silicon, recycling semiconductor-grade acid, and depositing a thin film. Every solution comes from the team that developed it, so you can reach the people behind the work directly. Sign up to search the full network and post your specific need.

Short-wave infrared photodetectors

JL

STRATIO, INC.

Ge-based SWIR sensor with novel pixel design solving reverse current challenge

A germanium SWIR sensor whose pixel design fixes the reverse current problem.

In developmentStartup
Learn more
DS

Northeastern University

Transfer printing technology for III-V photodetector integration on silicon

Transfer printing puts III-V material onto silicon at room temperature, reusably.

In developmentUniversity
Learn more
MP

National Research Council

Sub-bandgap organic-inorganic heterojunction for SWIR photodetectors

An organic-inorganic charge transfer complex responding from 700 to 1500nm.

In developmentUniversity
Learn more
LC

Atomix Inc (dba 2Dlayer)

Scalable low-temperature deposition of bismuth oxyselenide thin films for infrared photodetection

Bismuth oxyselenide deposited on silicon at a CMOS-compatible temperature.

In developmentStartup
Learn more
GE

National Chung Cheng University

Si-based GeSn short-wave infrared photodetectors

GeSn on silicon, extending the detection range at low cost.

In developmentUniversity
Learn more
ZJ

ZIPTON TECH LLC

GaSb-based NIR photodetectors for imaging and autonomous vehicles

GaSb grown by MBE on a lattice-matched substrate, for autonomous vehicles.

In developmentStartup
Learn more
SZ

McGill University

Si CMOS compatible SWIR photodetectors using Indium Nitride nanostructures

Indium nitride nanowires tuned across 900 to 1700nm on CMOS silicon.

In developmentUniversity
Learn more

III-nitrides on silicon

SZ

McGill University

Low cost epitaxy of III-nitrides on silicon

Low-cost epitaxy of III-nitrides on silicon, already at wafer scale.

In marketUniversity
Learn more
JM

Southwest Research Institute

Plasma Enhanced Magnetron Sputtering (PEMS) for III-N Materials on Silicon Substrates

Magnetron sputtering depositing III-N at high rate and lower temperature.

In developmentSupplier
Learn more
ZA

UC Berkeley

Epitaxy of Group-III nitrides using metal-graphene encapsulation and ammonolysis

Metal-graphene encapsulation and ammonolysis, bypassing conventional epitaxy.

In developmentUniversity
Learn more
YL

Laser Universal LLC

Fast growth of high-quality nitride semiconductors at low temperature

A CO2 laser assists MOCVD, growing GaN fast on silicon or sapphire.

In developmentStartup
Learn more

Recycling semiconductor-grade acid

XZ

Auburn University

Electrochemical membrane separation system for ultrapure sulfuric acid recycling

Electrochemical membrane separation recovering acid to sub-ppb purity.

Sponsored researchIn developmentUniversity
Learn more
GU

Hofstra University

Trace-metal contamination control in sulfuric acid recycling systems

Identifies which materials in the recycling loop contribute the trace metals.

In developmentUniversity
Learn more
You're viewing a preview of electronic materials on Halo.

Sign up free to search the full network and post your specific need.

Already have an account?

Who is working on electronic materials

Organizations in electronic materials

Universities, startups, and suppliers with solutions in electronic materials.

Electronic materials organizations

Innovators in electronic materials

Researchers and inventors advancing electronic materials.

Electronic materials experts

About electronic materials

Two problems pull most of the work on Halo. Seven entries build a short-wave infrared photodetector, each from a different material system and all aiming at silicon compatibility, and four recycle semiconductor-grade sulfuric acid to parts-per-trillion purity. On Halo it spans six groups, including short-wave infrared photodetectors, III-nitrides on silicon, and recycling semiconductor-grade acid.

Stage of development. Work on electronic materials on Halo comes mostly from university programs. 32% of the solutions are in market. Co-development and sponsored research are the usual partnering routes, and about 36% of the solutions that state terms offer fee-for-service work.

Three trends in electronic materials on Halo

Seven material systems, one detector. Germanium, III-V transferred onto silicon, an organic-inorganic charge transfer complex, bismuth oxyselenide, GeSn, GaSb, and indium nitride nanowires. Every one targets short-wave infrared and almost every one names CMOS or silicon compatibility. InGaAs is the incumbent and it is expensive, which is the single fact organizing this cluster.

Growing on silicon, by any route. Four entries put III-nitrides on silicon and each avoids conventional epitaxy differently: magnetron sputtering at reduced temperature, metal-graphene encapsulation with ammonolysis, a CO2 laser assisting MOCVD, and a low-cost epitaxy already at wafer scale. Lattice mismatch is the obstacle, and the substrate's price is why nobody gives up.

Acid purity as a materials problem. Four entries recycle semiconductor-grade sulfuric acid, quoting sub-ppb and sub-5 ppt metal purity. Two avoid thermal distillation entirely, using ambient-stage coatings or fractional crystallization with acoustic metamaterials. A fourth does not purify anything: it works out which materials in the loop are shedding the trace metals in the first place.

531organizations
584solutions listed
68%from university labs
32%in market

Frequently asked questions

What are electronic materials?

Electronic materials covers the semiconductors, films and chemistries a device is built from. It spans short-wave infrared photodetectors in several material systems, routes to growing III-nitrides on silicon, the recycling of semiconductor-grade sulfuric acid, lithography resists and packaging dielectrics, thin-film deposition methods, lead-free photovoltaic perovskites, and the substrate and traceability work around a circuit board. Semiconductor manufacturers and electronics companies are the buyers.

What are examples of electronic materials?

Five examples of electronic materials on Halo include:

  • A germanium SWIR sensor whose pixel design fixes the reverse current problem. (STRATIO, INC.)
  • Low-cost epitaxy of III-nitrides on silicon, already at wafer scale. (McGill University)
  • Electrochemical membrane separation recovering acid to sub-ppb purity. (Auburn University)
  • Amorphous metal-imidazolate films as an EUV resist, controlled sub-nanometre. (Johns Hopkins University)
  • Roll-to-roll spatial ALD laying oxide barrier stacks with no solvent. (University of Waterloo)

What are the latest electronic materials innovations?

Over the past 90 days, researchers and innovators on Halo have added these electronic materials:

  • Inverts the prediction, searching molecules for the electronic property wanted. (Apoello Limited)

Which companies and suppliers are developing electronic materials?

There are 531 organizations with electronic materials on Halo, 109 of them universities and research institutions. Among them are STRATIO, INC., Northeastern University, and National Research Council. Most offer co-development or sponsored research. Sign up to see every organization working in the area and to send them your specific need.

How do I find electronic materials research partners?

Browsing electronic materials on Halo is free. Sign up to search the full network and save the ones you want. Post your specific need to get exact matches. Organizations reply directly on the platform.

What are R&D teams looking for in electronic materials?

Over the past 12 months, R&D teams on Halo have posted these electronic materials needs:

  • Materials and device structures for optical modulators (June 2026)
  • Magnetic property testing of synthesized solid materials (October 2025)

Related industrial materials research areas

Adhesives and sealantsMetallurgical processingPolymer compositesSurface treatment and coatingsCorrosion preventionSmart and responsive materialsConstruction materialsThermal management materialsAdvanced ceramics and glassesBrowse all industrial materials solutions
Halo home

Partner smarter. Move faster.

Get new partnering requests
delivered to your inbox.

Company

About Blog Careers Halo Awards

Support

FAQs Help center
Contact us

Sponsors

Customer stories
Privacy Policy Terms of Service
© 2026 Halo Cures, Inc.